[MPlayer-dvb] diseqc

[Joakim Vinevall]

Hi!

How do I configure mplayer to use the diseqc switch? It it possible?

/Joakim

[Nico Sabbi]

Post by Joakim Vinevall
Hi!
How do I configure mplayer to use the diseqc switch? It it possible?
/Joakim

diseqc up to 1.2 (that is tone burst (aka A/B)) and plain 1..4 LNB
selection is already possible: set the diseqc parameter in every
row of ~/.mplayer/channels.conf.sat.

e.g in the following row the 1 after v indicates LNB 1
RaiInternational:11381:v:1:4400:1:100:36:0:0:0

[Joakim Vinevall]

Ahaa!
Thanx m8!

/joakim

Post by Nico Sabbi
row of ~/.mplayer/channels.conf.sat.

[Igor Nikanov]

Hi, Nico

Post by Nico Sabbi
diseqc up to 1.2 (that is tone burst (aka A/B)) and plain 1..4 LNB
selection is already possible: set the diseqc parameter in every
row of ~/.mplayer/channels.conf.sat.
e.g in the following row the 1 after v indicates LNB 1
RaiInternational:11381:v:1:4400:1:100:36:0:0:0

but there's some disparity between channels.conf for szap (from dvb-apps) and channels.conf for MPlayer.

Concerning of szap-channels.conf there's LNB0 (diseqc position 0)
and this string should be look like
RaiInternational:11381:v:0:4400:1:100:36:0:0:0

Concerning of MPlayer-channels.conf there's LNB1 (diseqc position 1, not position 0) and the same record in
channels.conf should be look like
RaiInternational:11381:v:1:4400:1:100:36:0:0:0


Igor

[Nico Sabbi]

Post by Igor Nikanov
Hi, Nico

Post by Nico Sabbi
diseqc up to 1.2 (that is tone burst (aka A/B)) and plain 1..4
LNB selection is already possible: set the diseqc parameter in
every row of ~/.mplayer/channels.conf.sat.
e.g in the following row the 1 after v indicates LNB 1
RaiInternational:11381:v:1:4400:1:100:36:0:0:0

but there's some disparity between channels.conf for szap (from
dvb-apps) and channels.conf for MPlayer.
Concerning of szap-channels.conf there's LNB0 (diseqc position 0)
and this string should be look like
RaiInternational:11381:v:0:4400:1:100:36:0:0:0
Concerning of MPlayer-channels.conf there's LNB1 (diseqc position
1, not position 0) and the same record in channels.conf should be
look like
RaiInternational:11381:v:1:4400:1:100:36:0:0:0

yes, basically in mplayer's config file teh diseqc switch must be
szap's diseqc+1